.jpg)
Tarang F-4
Tarang F-4
Features and Benefits:
Direct Sequence Spread Spectrum technology.
Each direct sequence channel has 64K unique network addresses. Transmit Power: 0 dBm. RF data rate: 250 kbps.
Acknowledgement mode communication with retries. Power saving modes.
Source / destination addressing. Unicast and broadcast communication. Analog to digital conversion and digital I/O line support. Default configuration for ready to use.
Specifications:
-
Point to point, point to multi point, Mesh and peer-to-peer topologies on proprietary stack.
Specifications:
Power
| Supply Voltage | 3.3 to 3.6V |
| Transmit Current | 45mA |
| Idle/Receive Current | 50mA |
| Power-down Current | <10 µA |
General
| Rating Frequency | ISM 2.4 - 2.4835 GHz |
| Maximu Transmit Power Output | 1mW (+0 dBm) |
| RF Data Rate | 250 kbps |
| Receiver Sensitivity | -92 dBm |
| Serial Interface Data Rate | Upto 115200 baud |
| Operating Temperature | -40 to 85 °C |
| Antenna Options | Chip Antenna, Wire Antenna |
| Antenna Connector | MMCX |
Network
| Supported Network Topologies | Peer-to-peer, point to multipoint & Mesh |
| Number Of Channels | 16 direct sequence channels |
| Addressing Options | PAN ID, Channel and addresses |
Mechanical
| Dimensions | 37mm x 26mm. |
| Interface Connector | 20 pin receptacles, 2.00mm pitch. |